The average lifespan of a traditional tank water heater is eight to ten years. When the unit nears the end of its lifespan, it will stop functioning as efficiently as it once did, and eventually, the unit will stop working and must be replaced.
You must consider a few things before a water heater replacement to ensure you install the best unit for your family and there are no unpleasant surprises when it’s time to pay the bill.
Choosing the Best Type of Unit For Your Family
It’s essential that you select the best unit for your home and family before a water heater replacement. If you currently have a tank water heater, you don’t have to replace it with another tank model. You’ll have the unit for 10+ years, so you want to be sure that you select the best option.
There are two types of water heaters, traditional tank units and tankers water heaters. Tank models fill with the water entering your home and heat and store the water so you always have hot water when needed. If you don’t have much money to spend on the water heater replacement, tank water heaters are the least expensive and the least costly to install.
Your other option is a tankless water heater, which doesn’t store water. The unit will turn on when the hot water runs and turn off when you turn off the hot water. Tankless units are more expensive to buy and install and have a lifespan of 20 years. If you have the money to invest in a tankless water heater, it is the more cost-effective option because a tank water heater must be replaced twice in 20 years, and a tankless unit must be replaced just once.
Tankless models have a few other benefits you can’t get from a tankless model, including:
- You won’t run out of hot water: If you have a tankless water heater and use a significant amount of hot water, you can deplete the hot water supply, and it can take over an hour for the unit to recover. Tankless models don’t store water and provide hot water on demand, so you won’t have to worry about running out.
- Saves space: Tank water heaters are large because they have to store 40+ gallons of water. Tankless models are the size of a suitcase and can be hung on an interior or exterior wall, freeing up floor space in your home.
- Eliminate the risk of a leak: When a tank water heater cracks, the water in the tank will flood your home, causing significant water damage and mold growth. Tankless units don’t store water, so you won’t have to worry about a crack and a flood. Water can drip from the unit if it malfunctions, but it will be so little that you can dry it with a towel.
- Saves money: Tank water heaters must run many times a day to keep the water supply hot, and they consume a significant amount of energy, affecting your electric bills.
- Tankless models run only when hot water is used, and your energy bills will decrease. A portion of the water heater will pay for itself in the money you’ll save on your electric bills.
You can make an informed decision when you understand the pros and cons of both types.
Whether you install a tank or a tankless water heater, choosing an energy-efficient unit is essential to keep your energy bills down.
If you decide to install a traditional tank water heater, you should check the Energy Factor (EF) on the units you are considering buying. This is based on the amount of hot water produced per unit of fuel consumption on a typical day. You should purchase a water heater with an Energy Factor of .93 or greater, saving five to ten percent more than a standard efficiency water heater.
If you decide to install a tankless model, you should buy a unit with an Energy Factor of .80 to .99.
Who Will Install the Unit
You have to decide who will replace your water heater, and you should leave the job to a licensed plumber. If you attempt a DIY water heater replacement and make a minor mistake or skip a step, the unit won’t function correctly, and you can cause significant damage to the unit. Also, new water heaters come with warranties, and a DIY installation will void the warranty. If something goes wrong with the unit in the future, you’ll have to pay for the repair yourself.
It will help if you read the plumber’s reviews before you hire them to be sure you’re working with a reputable, licensed professional.
What Will Happen To the Old Unit
Another thing you must consider when replacing your water heater is what will happen to the old unit when it’s removed. It’s best to discuss the plumber’s policy before they’re hired to ensure the disposal won’t add to the final cost of the installation. The last thing you want is to find out at the last minute that the plumber won’t remove the old unit or will charge extra, so this is an important question to ask when hiring a plumber.
Many plumbers dispose of old units for free, and some will remove the old unit from the home but will charge a disposal fee. Some plumbers won’t remove the unit from your home, and you’ll have to figure out what to do with it. Hiring a plumber who will handle the disposal for free is best because it won’t add to the replacement cost.
Call Clarksburg Plumbing
If it’s time to replace your water heater, the professionals at Clarksburg Plumbing can help. We’re a full-service plumbing company, proudly serving customers in the area for years. Our plumbers are highly trained and have the skill necessary to tackle the toughest jobs in the plumbing industry. We also provide emergency service 24/7 to fix issues that must be addressed immediately.
You can call us to schedule an appointment or book online.
See our most recent blog on this topic here.
Find out our service area here.
Photo By fizkes at Shutterstock
Expert Tips for Efficient and Effective Water Heater Repair
A well-functioning water heater is essential for daily household tasks, such as taking showers, washing dishes, and doing laundry. However, like any appliance, water heaters can develop issues over time, leading to inefficiency or complete failure. For your water heater to remain working in optimal condition, it’s crucial to address problems promptly and effectively.
Choosing a Professional Repair Company
A professional water heater repair company is essential to maintain your water heating system. It may be challenging to pick the right company. To raise your chances of hiring a competent professional, you need to consider the following:
Experience and Expertise
A professional who has successfully repaired various water heaters will be better equipped to handle your specific needs. Look for a company that has been in business for several years and has a team of skilled technicians knowledgeable about different water heater models and brands. Clarksburg Plumbing has served numerous clients for many years, and the employees have acquired professional skills during their experience handling various tasks.
Licensing and Insurance
An operating license is crucial for a professional repair company. This ensures they operate legally and have the qualifications to perform the job. Additionally, insurance protects you from any potential liabilities in case of accidents or damages during the repair process.
Customer Reviews and Testimonials
You can gauge the quality of a water heater repair company by reading customer reviews and testimonials. Look for reviews on their website, social media pages, and third-party review sites like Yelp or Google. This way, you can see a company’s reputation and satisfaction among its previous clients. Due to its quality services, Clarksburg plumbing has numerous positive reviews from past clients.
Pricing and Transparency
A professional repair company should provide clear and transparent pricing for their services. Request a detailed quote before any work begins, and ensure that it includes all necessary parts, labor, and additional fees. This will help you avoid unexpected costs and make comparing quotes from different companies easier.
Availability and Response Time
When your water heater breaks down, you need a water heater repair company that can respond quickly and efficiently. Choose a company that offers 24/7 emergency services and has a fast response time. This will minimize the inconvenience caused by a malfunctioning water heater and ensure your issue is resolved immediately. Clarksburg Plumbing quickly responds to clients whenever their services are required.
Warranty and Guarantees
Offering warranties and guarantees demonstrates a company’s confidence in the quality of its work. It provides peace of mind knowing that any issues will be addressed promptly and without additional cost.
Training and Certification
Technicians working for a professional repair company should have proper training and certification. This ensures they know the latest industry standards and can perform repairs safely and efficiently. Ask the company about their technicians’ training and certifications before hiring them.
Every water heater issue is unique, and a professional repair company should be able to provide customized solutions tailored to your specific needs. This ensures that your water heater is repaired efficiently and effectively, prolonging its lifespan and improving performance.
Common Water Heater Issues and Their Causes
Water heaters can experience issues that may affect their performance and efficiency. Understanding common water heater problems and their causes can help homeowners promptly identify and address them, ensuring a consistent hot water supply and prolonging the appliance’s life. Common issues include:
Leaking Water Heater
Leaks can occur in various water heater parts, including the tank, valves, and connections. Corrosion, excessive pressure, or loose connections can cause these leaks.
Rusty or brownish water coming from the hot water tap can be a sign of corrosion inside the water heater tank or the presence of sediment. Replacing the anode rod and flushing the tank can help address this issue and prevent further corrosion.
High Energy Bills
An inefficient water heater can increase energy consumption and higher utility bills. Insulating the water heater, checking for leaks, and maintaining the thermostat settings can help improve efficiency and reduce energy costs.
Pilot Light Issues
For gas water heaters, a malfunctioning pilot light can cause the unit to stop producing hot water. Issues with the thermocouple, gas valve, or pilot light assembly can lead to this problem. Regular inspection and maintenance of these components can help prevent pilot light issues and ensure the proper functioning of the water heater.
Preventive Maintenance Measures for Your Water Heater
Taking the necessary steps to maintain your water heater can help avoid costly repairs, extend its lifespan, and improve energy efficiency. Here are preventive maintenance measures to keep your water heater in top condition.
Regular Drain and Tank Inspection
You should employ a professional service provider to inspect and drain your tank at least once a year. Draining the tank helps to remove sediment and mineral deposits, which can lead to corrosion and reduce the heater’s overall performance. Regular inspection also allows you to identify any potential issues early on, preventing costly repairs.
Tank and Pipe Insulation
Hot water pipe insulation can significantly improve the water heater’s energy efficiency, reducing heat loss and energy bills. Your service provider can use pre-cut insulation blankets or jackets specifically designed for water heaters and insulating pipe sleeves for the pipes. It’s essential to engage a professional since some critical components shouldn’t be covered.
While homeowners can perform many preventive maintenance tasks, scheduling regular professional maintenance for your water heater is essential. A qualified technician can thoroughly inspect the unit, identify potential issues, and perform necessary repairs or adjustments.
If you’re experiencing any common water heater issues, don’t hesitate to contact Clarksburg Plumbing for expert repair services. Our employees have the knowledge and tools to diagnose and fix any water heater problem efficiently and effectively. We offer prompt and reliable service, ensuring your water heater is up and running quickly. Don’t let a malfunctioning water heater disrupt your daily routine or cause costly damage to your home. Contact us today to schedule a water heater repair appointment.
See our most recent blog on this topic here.
Photo By gguy at Shutterstock
Snaking Drain Cleaning Service: The Solution to Clogged Drains
Clogged drains can be one of the most frustrating and inconvenient plumbing problems. Not only can it slow down household tasks, but it can also lead to more serious issues like leaks and damage to pipes. Fortunately, there are easy and effective methods to unclog drains and restore the functionality of your plumbing system. One such method is snaking drain cleaning. This blog post will discuss the snaking drain cleaning service, how it works, and when it is used.
What Is Snaking?
Snaking drain cleaning is a method used to remove clogs from pipes and drains by using a flexible cable, also known as a snake, to break up and remove the blockage. Professional plumbers commonly employ this technique, which is very effective in removing various obstructions, including soap scum, hair, and mineral deposits. So if you’re experiencing slow drainage or foul odors coming from your pipes, a snaking drain cleaning service might be the solution you’re looking for. Don’t let a clogged drain disrupt your daily life – call a professional plumber today to get your pipes running smoothly and efficiently again.
How Does Snaking Drain Cleaning Work?
The process begins by inserting the snake, which is a long, thin, coil-like rod, into the drain. The coil is attached to a motor that rotates the wire, allowing it to penetrate deep into the drain. As it moves further into the pipe, it scrapes and loosens any blockages. The plumber can apply pressure while rotating the snake to break through tougher blockages if needed. The snake is then removed, along with any debris it has collected. Once the clog is removed, the plumber will run water through the drain to ensure it’s completely clear.
When Is Snaking Used?
Tree Roots Invasion
Although trees and plants benefit the environment, they can be a menace to plumbing lines. This situation commonly occurs with old pipes and underground plumbing. When the roots of a tree grow into or around these pipes, they can cause blockages and backups. While regular snaking may not do the trick, a heavy-duty motorized drain snake effectively clears roots. This machine can cut the roots to clear the blockage and prevent further damage. Therefore, if you suspect that tree roots may be causing a clog in your pipes, snaking drain cleaning may be the best way to address the issue.
Grease buildup is a frustrating problem that can cause many issues in your home’s plumbing. When your drain starts to clog due to the accumulation of grease and other fatty substances, a snaking drain cleaning service is often the best solution. This powerful procedure can easily puncture the grease solids, breaking them apart and freeing the pipe. Snaking with a good cleaning agent can efficiently remove the grease buildup and restore your plumbing system’s health.
The Clog Is Deep In the Drain
When faced with a stubborn clog deep within your drain, it can be tempting to try various home remedies before calling a professional plumber. However, snaking is often the best solution to clear the blockage and restore your pipes to proper working order when the clog is especially deep or persistent. Using a specialized tool called a drain snake, a skilled plumber can navigate the twists and turns of your plumbing system to easily reach the root of the problem and remove the clog. So if you’re dealing with a frustrating clog that won’t budge, don’t hesitate to call an expert to get the job done right.
Nobody likes dealing with a clogged drain, and the issue can seem even trickier when it comes to mineral buildup. Mineral buildup occurs when minerals in the water accumulate on the walls of your pipes over time, gradually narrowing the pipes until the water can no longer pass through. While addressing the issue promptly is important, taking the right approach can be just as important. You don’t want to cause damage to the pipes, which is why snaking drain cleaning is often the best solution for mineral buildup. A professional plumber can easily snake through the buildup, allowing the water to flow freely again.
Why Is Snaking Effective?
Snaking is effective because it’s a targeted approach to clearing a drain clog. It’s not a one-size-fits-all solution, as a plumber can adjust the snake’s size and shape depending on the drain.
Another advantage of snaking is that it is safe for your pipes. Chemical drain cleaners can damage your pipes, and hydro jetting can cause undue pressure that may lead to cracks or leaks, which isn’t the case with a snake. Snaking puts less stress on your pipes, ensuring they remain strong and effective for years.
Unlike hydro-jetting and other advanced methods, snaking drain cleaning service is a non-invasive and cost-effective option. Snaking does not require major digging or replacement of pipes, which can be quite expensive.
Time is essential when dealing with a clogged drain, and snaking is one of the quickest solutions available. A plumbing snake can usually clear a clog in just a few minutes, allowing you to get back to your daily routine without too much disruption.
Keep Your Drains Flowing Freely With Snaking
Snaking is an effective way to quickly and safely remove blockages from your pipes, saving you time and money in the long run. If you’re dealing with a clogged drain, don’t hesitate to call a professional plumber to snake your drains and get them flowing again. Not only will you have a fully functioning drain, but you’ll also prevent further damage to your plumbing system.
Call Us For Professional Snaking
At Clarksburg Plumbing, our experienced plumbers can provide fast and reliable snaking drain cleaning. We use the latest tools and techniques to ensure your drains are flowing freely and safely once again. From minor clogs to complex blockages, we can help you quickly get your plumbing system back in working order. Contact us to help get your drains back up and running.
See our most recent blog on this topic here.
Photo By terex at istock
Do You Need To Hire A Professional In Water Heater Replacement In Rockville, MD?
Your water heater is one of the most essential appliances in your house. The unit heats and stores the water, so you always have hot water when needed.
The average lifespan of a tank water heater is around ten years, and when the unit nears the end of its life, it will develop problems that indicate it’s time for a water heater replacement.
If your unit develops any of the following problems, it may be time to hire a plumber to replace the water heater.
The Unit Can No Longer Heat The Water
A lack of hot water can be due to a few problems. If you have an electric unit and there isn’t power going to it, it won’t heat the water. If your water heater runs on propane or oil, the pilot could be out, or there might not be enough fuel in the tank. If you have a gas unit, the pilot may not be lit, your service may have been disconnected due to non-payment, or there could be a widespread outage. A broken heating element can also prevent the unit from heating the water, and these issues can be fixed.
If the unit is over ten years old, it has likely reached the end of its life, and the only way to restore the hot water is to replace it.
The Water Doesn’t Get Hotter Than Lukewarm
Does the hot water fail to get hotter than lukewarm? If so, the thermostat could be set incorrectly, or it could be broken. Also, if the unit has two heating elements and one fails, the second element won’t have enough power to heat the water supply, and each of these problems can be fixed.
If the unit is nearing ten years old, it may not be able to run as efficiently as it once did, preventing the water from heating to the desired temperature.
A plumber will inspect the unit to find the problem’s cause, and if poor efficiency prevents the unit from heating the water, it’s time for a water heater replacement. The new unit will have the power to heat the water to the desired temperature, restoring the hot water.
The Water Heater Makes Strange Sounds
Does your water heater make strange sounds? If so, the sound indicates a problem because a properly functioning unit will be silent when it heats the water.
If the unit makes a clanging sound, there are likely large pieces of sediment in the tank that bang against the sides. There’s a chance that a plumber can flush the sediment, but when it gets to the point that it causes a clanging sound, the chance it can be flushed is low, and the unit must be replaced. If the unit isn’t replaced quickly, the sediment can crack the tank and cause a flood in your home.
A popping sound also indicates a significant amount of sediment at the bottom of the tank. When water gets trapped beneath the sediment, it will boil, causing a popping sound. The heating element can be damaged if the problem isn’t addressed soon, and if the plumber cannot flush the sediment, the unit must be replaced.
You Frequently Run Out of Hot Water
If you use too much hot water quickly, you can run out of hot water. If you run out of hot water often and you haven’t used enough hot water to deplete the supply, it’s likely time for a water heater replacement.
There are two potential reasons you keep running out of hot water, and the first is changes in your household. If someone recently moved into your house, your family’s hot water demand will increase, and your water heater may not be large enough to meet that demand. Replacing the water heater is the only way to be sure you can shower without the water getting cold.
A considerable amount of sediment in the tank is the second possible reason you often run out of hot water. Large pieces of sediment will occupy space in the tank designed for water storage. If the unit holds less water than it once did due to a buildup of sediment, a plumber will try to flush it, but there’s a good chance they can’t, so the unit must be replaced.
Brown or Rust-Colored Water
Does the water coming from the hot water tap run brown or rust-colored? If so, the water is contaminated, and sediment could be to blame. When sediment builds up in the tank, it can contaminate the water, and if it can’t be flushed, the unit must be replaced.
When the water heater nears the end of its lifespan, the tank’s inside can break down, causing mineral deposits and tiny metal shards to contaminate the water. The only way to resolve the problem is to replace the water heater.
A Puddle of Water Around the Unit
A puddle of water around the water heater indicates a leak in the tank that will allow 40+ gallons of water to flood the home if the problem isn’t addressed immediately. You should turn off the water to the unit, and since a leak can’t be fixed, you must hire a plumber to replace the water heater.
Call Clarksburg Plumbing Today
If it’s time for a water heater replacement and you need to hire a plumber, look no further than Clarksburg Plumbing. We’re a full-service plumbing company that has been in business for over 14 years. We help hundreds of home and business owners every year, and we guarantee excellent service.
Our plumbers are professionally trained, licensed, and insured and have the knowledge and skill to handle every job, simple or complex.
We understand that plumbing problems can occur at the most inconvenient times. If you have a plumbing problem that must be addressed immediately, we provide emergency service 24 hours a day, 365 days a year. We’ll immediately send a tech to your house when you call for emergency service so that the problem can be resolved quickly.
Call us today to schedule an appointment.
See our most recent blog on this topic here.
Photo By Andrey Sayfutdinov at istock
How a Water Heater Repair Can Improve Your Home’s Energy Efficiency
Water heaters are essential to modern homes, providing hot water for bathing, cooking, and cleaning. However, water heaters can become less efficient over time, leading to higher energy bills and reduced performance. A water heater repair can help to improve your home’s energy efficiency, reducing your carbon footprint and saving you money on your utility bills.
Benefits of Repairing Your Water Heater
A water heater is essential, providing hot water for daily activities such as bathing, washing dishes, and laundry. Over time, water heaters can develop issues affecting their performance and efficiency. Repairing your water heater can offer numerous benefits, ensuring you enjoy a steady hot water supply while saving money and energy in the long run. The following are the key benefits of a water heater repair.
A well-maintained water heater operates more efficiently, using less energy to heat water. Repairing issues like sediment buildup or faulty heating elements can significantly improve the appliance’s performance, lowering energy consumption and utility bills.
Consistent Hot Water Supply
A properly functioning water heater ensures a consistent hot water supply throughout your home. Repairing any issues that may cause fluctuations in water temperature or pressure can help maintain a comfortable and reliable hot water supply for your daily needs.
Reduced Risk of Leaks
Water heater leaks can cause significant damage to your home and belongings. Repairing any signs of corrosion, loose connections, or damaged components can help prevent leaks and protect your property from water damage. Clarksburg Plumbing offers effective repairs, saving your property from water damage.
A well-maintained water heater is less likely to pose safety risks, such as gas leaks or electrical hazards. Regular repairs and maintenance can help ensure your appliance operates safely and complies with local safety regulations. Professionals from Clarksburg Plumbing carry out maintenance services to ensure water heaters are safe for use by their clients.
Lower Carbon Footprint
By improving the efficiency of your water heater, you can reduce its energy consumption and, consequently, its carbon footprint. This contributes to a more sustainable and environmentally friendly home.
Increased Home Value
A well-maintained and efficient water heater can increase the value of your home. Potential buyers often consider the condition of essential appliances when evaluating a property, and a properly functioning water heater can be an attractive selling point.
A noisy water heater can indicate underlying issues, such as sediment buildup or a failing heating element. Repairing these problems can help reduce noise and restore quiet operation.
While repairs may involve an upfront cost, they can save you money in the long run by preventing more expensive issues and extending the life of your appliance. Regular maintenance can also help you avoid needing an emergency replacement, which can be costly and inconvenient.
How a Water Heater Can Impact Your Home’s Energy Usage
A water heater can significantly contribute to your home’s energy usage, impacting your energy bills and carbon footprint. Understanding the various factors influencing a water heater’s energy consumption can help you make informed decisions about selecting and maintaining the most efficient system for your needs.
Type of Water Heater
The type of water heater you choose can significantly affect your home’s energy consumption. Traditional tank-based water heaters store and continuously heat a large volume of water, which can lead to significant energy waste. In contrast, tankless water heaters heat water on demand, reducing standby energy losses and offering greater energy efficiency. Clarksburg Plumbing provides various types of water heaters to choose from.
Size and Capacity
An appropriately sized water heater can help optimize energy usage. A unit that is too small may struggle to meet your hot water demands, causing it to work harder and consume more energy. Conversely, an oversized unit may waste energy by heating more water than necessary. Experts at Clarksburg Plumbing can guide you in choosing the correct water heater size.
Proper water heater and hot water pipes insulation can significantly reduce heat loss, conserving energy and lowering utility bills. Insulating blankets and pipe sleeves are relatively inexpensive and easy to install, making them a cost-effective way to improve your water heater’s efficiency.
Setting your water heater’s thermostat to an appropriate temperature can help minimize energy waste. You may notice energy savings without sacrificing comfort by slightly lowering the temperature.
Regular water heater repair ensures it operates efficiently. Flushing the tank to remove sediment, checking for leaks, and inspecting the anode rod are all important steps in maintaining your water heater’s performance and prolonging its lifespan.
Heat Pump Water Heaters
Heat pump heaters use electricity to move heat from the air or ground to heat water, making them more energy-efficient than traditional electric water heaters. They can save you money on energy bills in the long run.
Hot Water Usage Habits
Your hot water usage habits can also impact your home’s energy consumption. You can take shorter showers and wash clothes using cold water to reduce energy bills.
Water Heater Location
The location of your water heater can affect its efficiency. Placing it in a warm, insulated area can help reduce heat loss, while installing it close to the points of use can minimize the energy lost as hot water travels through pipes.
A well-designed hot water system can help optimize energy usage. This includes proper pipe sizing, efficient distribution, and recirculation systems to minimize heat loss and ensure hot water is readily available when needed.
If you need water heater repair, don’t wait until it’s too late, contact Clarksburg Plumbing today for expert services. Our team of skilled professionals has years of experience diagnosing and repairing a wide range of water heater issues, from sediment buildup to thermostat problems. We offer prompt and reliable service, ensuring your water heater is up and running quickly. Don’t let a malfunctioning water heater disrupt your daily routine or increase your energy bills- contact us today.
See our most recent blog on this topic here.
Photo By Alexandr Vorontsov at istock